Samsung’s Galaxy S25 Edge came out last month after much anticipation, and today it’s been torn down on video by Zack at JerryRigEverything.
The phone is easily opened through the back after applying some heat to the adhesive and then using a suction cup. Inside there are a lot of screws as you may expect. The vibration motor is super thin, but interestingly the waterproofing membrane over the speaker is tilted at an angle because of the phone’s thinness.
Battery removal is very easy, perhaps the easiest system on the market, which debuted on the other S25 devices. Obviously, the battery is where a lot of the thickness was cut in order to achieve the phone’s 5.8mm profile.
The company also removed “slivers of frame” wherever it could, Zack says, with the SoC directly in contact with the vapor chamber in the S25 Edge vs. the S25 Ultra. The middle layer of the baseboard is much thinner on the Edge too. Finally, the titanium frame actually uses an aluminum inner frame.
